Kinetic modeling of liquid-phase esterification of acetic acid with n-butanol using heterogeneous poly(o-methylene p-toluene sulfonic acid) as catalyst

Liquid-phase esterification of acetic acid with n-butanol to n-butyl acetate is studied in the presence of a polymeric catalyst, that is, poly(o-methylene p-toluene sulfonic acid). The performance of the proposed catalyst is compared with the other commercially available homogeneous and heterogeneous catalysts in terms of its activity. Experiments are conducted in an isothermal stirred batch reactor to study the effects of speed of agitation, temperature, and catalyst loading on the rate of reaction. A concentration-based pseudo-homogeneous (PH) kinetic model and activity-based kinetic models such as PH, Eley-Rideal (ER), and Langmuir-Hinselwood-Hougen-Watson (LHHW) models are developed. All the models considered in this study resulted in similar percentage deviation close to 4%. Further, kinetic models are validated through additional experiments, and it is observed that the simple concentration-based PH model is able to predict experimental data with least deviation compared to activity-based PH, ER, and LHHW models. The developed kinetic models are also tested using the Fisher-Snedecor test (F-test) and are found to be acceptable. By incorporating both modeling data and validation data, the overall absolute average deviations of different models are found to be concentration-based PH model 4.354%, activity-based PH model 5.006%, ER I model 5.189%, ER II model 5.403%, ER III model 5.437%, and LHHW model 6.104%, illustrating the superiority of the simple concentration-based PH model.     

Development and validation of a mechanistic model for the release of embelin from a polycaprolactone matrix

Embelin is a natural agent with antimicrobial, antifungal and analgesic activities. This work presents a mechanistic model for the release of embelin from a polycaprolactone matrix. Based on the results of embelin release experiments and Raman microscopy measurements, the model assumes a dual dispersion of the embelin: agglomerated and dispersed. Embelin release mechanism combines the effects of the liquid migration into the matrix, the drug diffusion, and the drug dissolution within the wetted matrix. The model is formulated in terms of four partial differential equations that account for the mass balances of dispersed, agglomerated, and dissolved embelin, and aqueous solution. Model predictions show that the release mechanism involves three stages: a burst stage, in which dispersed embelin is rapidly released; a transition stage, in which dispersed and agglomerated embelin are simultaneously released; and, once the dispersed embelin depletion, a stable release stage until the agglomerated embelin exhausts.     

Novel green synthesis of Boswellia serrata leaf aqueous extract conjugated gold nanoparticles with excellent anti-acute myeloid leukemia property in comparison to mitoxantrone in a leukemic mice model: Introducing a new chemotherapeutic drug

The present research confirms the capacity of aqueous extract of Boswellia serrata grown under in vitro condition for the green synthesis of gold nanoparticles (AuNPs). Also, we showed the cytotoxicity, antioxidant, and anti-acute myeloid leukemia properties of AuNPs compared to mitoxantrone in a leukemic mouse model. The synthesized AuNPs were characterized using several techniques including XRD, TEM, FE-SEM, UV–Vis, and FT-IR. From the XRD pattern, four distinct diffraction peaks at 38.2°, 44.2°, 64.7° and 77.4° are indexed as (111), (200), (220) and (311) planes of FCC metallic gold. TEM and FE-SEM images revealed an average diameters of 15–30 nm for the nanoparticles. FT-IR findings offered antioxidant compounds in the nanoparticles were the sources of reducing power, reducing gold ions to AuNPs. UV–Vis revealed an absorption band at 536 nm that is related to the surface plasmon resonance of AuNPs. In vivo design, induction of acute myeloid leukemia was done by DMBA in 75 mice. Then, the mice were randomly divided into six subgroups, including untreated, control, HAuCl₄, B. serrata, AuNPs, and mitoxantrone. AuNPs (In the dose of 1 mg/kg body weight) similar to mitoxantrone, significantly (p ≤ 0.05) increased the platelet, lymphocyte, and RBC parameters and the anti-inflammatory cytokines (IL4, IL5, IL10, IL13, and IFNα) and reduced the weights and volumes of liver and spleen and their sub-compartment, the total WBC, blast, monocyte, neutrophil, eosinophil, and basophil counts, and the pro-inflammatory cytokines (IL1, IL6, IL12, IL18, IFNY, and TNFα) as compared to the untreated mice. By quantitative Real-Time PCR, S1PR1 and S1PR5 mRNA expression in lymphocytes were significantly (p ≤ 0.05) increased by treating the leukemic mice with the AuNPs and mitoxantrone. In vitro design, AuNPs similar to mitoxantrone had low cell viability dose-dependently against Human HL-60/vcr, 32D-FLT3-ITD, and Murine C1498 cell lines without any cytotoxicity on HUVEC cell line. Besides, the DPPH assay showed similar antioxidant potentials for AuNPs and mitoxantrone. In conclusion, the results of this research indicated the excellent capacity of synthesized gold nanoparticles using B. serrata leaf aqueous extract in the treatment of acute myeloid leukemia in leukemic mice.     

基于SVM的固化土无侧限抗压强度模型

为实现较少试验次数下固化土无侧限抗压强度(qu)的准确预测, 提出了基于支持向量机(SVM)的固化土qu的预测模型. 以固化剂各组分掺入比、龄期、初始含水量、固化剂掺量等因素为输入量, 固化土的qu作为输出量, 以径向基为核函数, 采用网格搜索法和交叉验证法进行参数优化, 建立了基于SVM的固化土qu的预测模型. 算例分析表明: 该模型适用于任意条件下固化土qu的精确预测, 且在较小试验成本下实现与响应面法相当的预测精度.     

Global optical model potential describing 12C-nucleus elastic scattering

We construct a new global optical model potential to describe the elastic scattering of ¹²C. The experimental data of elastic-scattering angular distributions and total reaction cross sections for targets from ²⁴Mg to ²⁰⁹Bi are considered below 200 MeV within the framework of the optical model. The results calculated using the derived global optical potential are then compared with the existing experimental data. The reliability of the global optical potential is further tested by predicting the elastic scattering data out of the mass and energy ranges, within which the global potential parameters are determined, and reasonable results are also obtained.     

秋千参数自激振动的数学模型与数值模拟

将秋千视为变长度单摆,基于归一化高斯函数构造了摆球相对摆杆的速度表达式.在此基础上建立了秋千的非线性动力学微分方程,并据此数学模型对秋千运动进行了数值模拟,得到了秋千的运动规律和功能转化的机制.     

A modified model for isothermal homogeneous and heterogeneous reactions in the boundary-layer flow of a nanofluid

The homogeneous and heterogeneous reactions in the boundary-layer of a flat surface are considered. The autocatalysts are assumed to be of regular sizes, while the solution is a dilute nanofluid. The heat release due to the chemical reactions is taken into account. The Buongiorno's model is used to describe the behaviors of this reaction system. This configuration makes the current model be different from all previous publications. Multiple solutions are given numerically to the rescaled nonlinear system, whose stability is verified. The results show that the strength coefficients of the homogeneous and heterogeneous reactions are key factors to cause the appearance of the multiple solutions in the distribution of the chemical reactions. Nanofluids enhance the diffusion of heat and help maintain the stability of chemical reactions.     

含水合物沉积物多相渗流特性研究进展

天然气水合物作为一种储量大、无污染的清洁能源近些年受到了广泛关注. 近20年来,中国进行了较大范围的陆海域天然气水合物储层勘探与储量预测.2017年,中国地质调查局牵头对南海神狐海域的天然气水合物进行了基于降压渗流原理的试验性开采.国内外已进行的水合物试采工程面临着气体产量低、出砂较多等问题,其最主要的原因之一是开发过程中沉积物内复杂多相渗流机理尚不明晰.本文综述了平行毛细管模型、Kozeny模型等广泛应用于天然气水合物开发渗流分析的理论模型,对比分析了水合物开发多尺度渗流过程模拟方法,简述了国内外含水合物沉积物渗透率测试、渗流过程中沉积物物性演变以及水合物开采室内模拟等方面的渗流实验进展,总结了矿场尺度的天然气水合物储层开采过程中产气数值模拟手段,展望了多相渗流模型、储层原位含水合物样品室内测试及结构与物性演化、矿场尺度数值模拟与水平井压裂技术等应用研究的未来方向与挑战.      

Modified Burgers-Reimschuessel model for moisture-sensitive polymers

Viscoelastic properties of moisture-sensitive polymers can be significantly affected by moisture in the ambient environment, resulting in drastic changes in the properties as the absorbed moisture content increases. In this article, a simple yet important modification to the Reimschuessel model is introduced by considering both plasticization and anti-plasticization induced by water molecules. The proposed model is validated against the results of four different polymers obtained by Onogi et al., which demonstrates its capability of describing the available data. This model can be used to estimate the performance and service life of products produced using moisture-sensitive polymers. It also reveals that small amounts of diffused moisture might have a stiffening effect on the mechanical properties of hydrophilic polymers.